Advantech LGA 1700 User Manual page 80

3.2.3.7 SATA and RST Configuration
SATA Controller(s)

"Enable" or "Disable" the SATA controller.
SATA Mode Selection

This can be configured as "RAID" or "AHCI".
Port 1~4

"Enable" or "Disable" SATA ports 1~4.
Hot Plug

"Enable" or "Disable" SATA Hot-Plug.
Spin Up Device

"Enable" or "Disable" the spin up device.
SATA Device Type

To identify if SATA is connected to a "Solid State Drive" or "Hard Disk Drive".
MIC-770 V3 User Manual
Figure 3.45 SATA and RST Configuration
66