PEG Port Feature Configuration
–
Detect Non-Compliance Device
Detect non-compliance PCI Express devices in PEG. If enabled, it will take more
time during POST.
3.2.3.5
PCH-IO Configuration
LAN1 Controller
"Enable" or "Disable" the LAN1 controller.
LAN1 Option-ROM
"Enable" or "Disable" the LAN1 boot option for legacy network devices.
LAN2 Controller
"Enable" or "Disable" the LAN2 controller.
LAN2 Option-ROM
"Enable" or "Disable" the LAN2 boot option for legacy network devices.
PCIE Wake
"Enable" or "Disable" PCIE to wake the system from S5. When this item is
selected as "Disabled", the Wake-on-LAN2 function is also disabled.
PowerOn by Modem
"Enable" and "Disable" PowerOn by Modem.
Restore AC Power Loss
Behavior when recovering from AC power loss: "S0" (power on), "S5" (power
off), or "Last State".
PCIE Device Initial Delay
Users can set a number of seconds to delay the PCIE device initial time.
Figure 3.42 PCH-IO Configuration
63
MIC-770 V3 User Manual