Table of Contents
Advertisement
2.4.4
Internal USB 2.0 Installation (R SKU only)
1.
Undo the 4 x screws and remove the bottom cover.
2.
Loosen the screws and adjust the bracket size in accordance with the USB don-
gle size.
3.
Replace the bottom cover and secure with screws.
2.4.5
COM 3/4/5/6 Port Installation
MIC-770 V3 supports 2 x standard RS-232/422/485 serial ports. If more serial ports
are needed, MIC-770 V3 can is expandable for up to 4 x serial ports by Flex I/O
98R17500601 (RS-232 only).
1.
Replace the baffle plate for COM 3/4 and COM5/6.
2.
Remove the HDD tray.
3.
Assemble the DB9 connector and baffle, and install the cable at the COM3/4
and COM5/6 connectors.
4.
Secure the COM module in the system and replace the HDD tray/bottom cover.
2.4.6
Expansion Module Installation (Optional)
MIC-770 V3 supports the following optional modules for different applications.
A: Expansion modules:
1.
98R17500001 MIC DVI FIO
2.
98R17500101 MIC HDMI/Remote power on/off FIO
3.
98R17500301 MIC HDMI kit FIO
4.
98R17500401 MIC Remote power on/off FIO
5.
98R17500601 MIC COM port kit FIO
6.
98R17500701 MIC Remote power on/off kit for SFIO
7.
98R17500801 MIC Reset/Remote power on/off/5V
8.
98R17500901 MIC GPIO kit FIO
9.
98R17501001 MIC DP kit FIO
10.
AIIS-DIO32-00A1E** AIIS GPIO module (32-bit)
11.
PCA-TPMSPI-00A1 TPM 2.0 module (SPI)
** AIIS-DIO32 requires a DB37 bracket (P/N: 1960068787N002)
B: Bracket for expansion modules
1.
Undo the 4 x screws and remove the bottom cover.
2.
Undo the HDD tray & expansion module baffle.
MIC-770 V3 User Manual
kit FIO
DC
22
Advertisement
Table of Contents
