Table of Contents
Advertisement
Select Channel [to Zero] (option 3 (ZERO) on the Setup screen)
1:
CH1
2:
CH. . .
3:
ALL CHANNELS
Select Mode (from the SetUp screen)
1:
LOG DATA
2:
TIME GRAPH
3:
EVENTS WITH
ENTRY
4:
SINGLE POINT
5:
SELECTED
EVENTS
6:
RETURN TO
SETUP SCREEN
© 2000, 2003 T
I
EXAS
NSTRUMENTS
From this screen you can set one or more sensors to
zero.
Note: Not all sensors can be zeroed. DataMate displays only
the sensors that can be zeroed.
Allows you to zero the sensor in this channel.
Allows you to zero the sensor in this channel.
Allows you to zero the sensors in all channels.
The default data collection mode for CBL 2™ is Time
Graph. To change the mode, follow the steps in Select
the Data Collection Mode on page 9.
Asks you to start the Quick Set-Up Procedure.
Allows you to set the interval between samples and the
number of data points collected. It is the default mode.
Collects one data point each time you press Í and then
asks you to correlate that data point to a numeric value. It
is used for experiments such as titrations and Boyle's law.
Collects one data point per second for ten seconds and
displays one averaged data point.
Collects one data point each time you press Í on the
calculator.
Returns to the setup screen.
I
NCORPORATED
G
S
CBL 2™ S
ETTING
TARTED WITH THE
27
YSTEM
Advertisement
Table of Contents
