Calibration; Experiment Menu; Graph Menu - Texas Instruments CBL 2 Getting Started Manual

Data collection device
Hide thumbs Also See for CBL 2:
Table of Contents

Advertisement

Calibration (option 2 on the Setup screen)
1:
OK
2:
CALIBRATE NOW
3:
MANUAL ENTRY
Experiment Menu (option 4 SAVE/LOAD on the Setup screen)
1: SAVE EXPERIMENT
2: LOAD EXPERIMENT
3: DELETE EXPERIMENT
4: DELETE ALL EXPERIMENTS
5: RETURN TO SETUP SCREEN Returns to the Setup screen.
Graph Menu (option 3 on the Main Screen)
1:
MAIN SCREEN
2:
SELECT REGION
3:
RESCALE
4:
MORE
© 2000, 2003 T
I
EXAS
NSTRUMENTS
From this screen you calibrate a sensor in either of two
ways. The first way is a two-point calibration; the
second way is to manually enter slope and intercept
values.
Note: Not all sensors can be calibrated. If you select a sensor that
cannot be calibrated, DataMate does not display this screen.
Saves the changes and returns to the setup screen.
Allows you to select a two-point calibration method.
Allows you to key in known calibration values.
Note: If you have set up your experiment but have not
collected data, this option saves the settings. If you have
both settings and data, it saves both. However, only the
current run of data is saved; previous runs of data that you
may have stored will not be saved.
This screen is available in DataMate for TI-83 Plus, TI-83 Plus
Silver Edition, TI-86, TI-89, TI-92, TI-92 Plus, and
Voyage™ 200 PLT.
Saves the experiment to CBL 2™ FLASH memory.
Reloads an experiment from CBL 2 FLASH memory.
Deletes an experiment from CBL 2 FLASH memory.
Deletes all experiments from CBL 2 FLASH memory.
From this screen you can select the data you want to
graph, select a region of the graph to view or analyze,
and change the scale of the graph.
The top part of the screen shows the graphs that you
can display on the screen. The bottom part lists the
menu options.
Returns to the Main Screen.
Allows you to select a region of the graph. (Data outside
the selected region is cleared from the graph and from the
calculator lists in which the data is stored.)
Allows you to change the graph by choosing autoscale or
entering values for x-scale or y-scale.
Displays additional graphing options.
I
NCORPORATED
G
S
CBL 2™ S
ETTING
TARTED WITH THE
25
YSTEM

Advertisement

Table of Contents
loading

Table of Contents