Table of Contents
Advertisement
Main Screen
1: SETUP
2: START
3: GRAPH
4: ANALYZE
5: TOOLS
6: QUIT
DataMate automatically recognizes an auto-ID sensor, identifies the channel to which
it is connected, loads a default experiment appropriate to the sensor, and shows the
current reading. All active channels are shown, and the Main Screen is updated as
auto-ID sensors are added or removed.
Sensors that are not auto-ID, such as pressure sensors and pH sensors, must be set
up manually. See instructions for Connect a Sensor to the CBL 2™ on page 6.
The Main Screen defaults to "meter mode" which updates readings for active
sensors every few seconds. To turn meter mode off or on, press à on the calculator.
Rescale Graph (option 3 on the Graph Menu screen)
1: AUTOSCALE
2: X SCALE
3: Y SCALE
4: RETURN
26
G
S
ETTING
TARTED WITH THE
The top part of the Main Screen shows the current
sensor setup and data collection mode. The bottom part
lists the menu options.
Select sensors, data collection mode, calibrate sensors, and
manage experiment files.
Begin collecting data.
Select and view a graph of the data from the experiment.
Select the type of analysis you want to perform with the data.
Select a tool such as RETRIEVE DATA or CHECK BATTERY.
Exit the DataMate program.
On this screen you can change the scale of the graph
being rescaled.
Automatically rescales a graph to fit your data to the calculator
screen (ZOOM STAT).
Allows you to enter value(s) for the x-axis scale.
Allows you to enter value(s) for the y-axis scale.
Returns to the Graph Menu screen.
CBL 2™ S
YSTEM
© 2000, 2003 T
I
EXAS
NSTRUMENTS
I
NCORPORATED
Advertisement
Table of Contents
