Command 102; Command 115 - Texas Instruments CBL 2 Getting Started Manual

Command 102

Power Control Command
pwrctl
0
-1
xxx
Note: Please see the Technical Information provided on the TI web site or the Resource CD
for additional important information regarding this command.

Command 115

channel=1, 2, 3, or 11
Returns the following information:
CBL 2™ sig
LabPro™ sig
Y-min
Y-max
Y-scale
sample rate
number of samples
operation command
calculation equation
sensor warm-up time
first coefficient
second coefficient
third coefficient
number of pages
active page
B-12 G S
ETTING TARTED WITH THE
1 through 1000
CBL 2™ S
YSTEM
{102 ,pwrctl }
Results
Power level controls in Normal Mode
Power port ON all the time
Channel powers up xxx seconds before
data taken
{115 ,channel }
CBL 2 significant figures
LabPro significant figures
Suggested Y-min for graphing
Suggested Y-max for graphing
Suggested Y-scale for graphing
Typical sample rate
Typical number of samples to collect
Typical operation command
Suggested calculation equation for
Command 4
Sensor warm-up time (in seconds)
Suggested first coefficient for
Command 4
Suggested second coefficient for
Command 4
Suggested third coefficient for
Command 4
Sensor's number of calculation pages
(usually 0)
Sensor's active calculation page
(usually 0)
© 2000, 2003 T I
EXAS NSTRUMENTS
I
NCORPORATED