Table of Contents
Advertisement
Select Sensor (from the SetUp screen)
1-6:
. . .
7:
MORE
8:
RETURN TO
SETUP SCREEN
1:
MOTION(M)
2:
MOTION(FT)
3:
NONE
Setup (option 1 on the Main Screen)
1:
OK
2:
CALIBRATE
3:
ZERO
4:
SAVE/LOAD*
* The SAVE/LOAD option is available only in DataMate for the TI-83 Plus, TI-83 Plus
Silver Edition, TI-86, TI-89, TI-92, TI-92 Plus, and Voyage™ 200 PLT.
28
G
S
ETTING
TARTED WITH THE
When you plug a non-auto-ID sensor into Channels 1-3
and select that channel on the Setup screen, DataMate
displays a list of analog sensors from which you can
choose.
This screen is the first of several screens.
Tells the CBL 2™ that this sensor is attached to the
selected channel.
Displays the next screen of the sensor list.
Returns to the Setup screen without selecting a sensor.
When you plug a non-auto-ID sensor into the digital
channel and select that channel on the Setup screen,
DataMate displays this list of motion sensors from
which you can choose.
Note: Additional programs are required to run the Rotary
Motion, Student Radiation, and Photogate sensors.
Tells the CBL 2 that the sensor attached to this channel
measures data in meters.
Tells the CBL 2 that the sensor attached to this channel
measures data in feet.
Returns to the Setup screen without selecting a sensor.
From this screen you can change the current
experiment setup, including change the sensors,
change the data collection mode, calibrate a sensor, set
a sensor to zero, and save or load experiment files.
The top part of the screen shows the sensors that are
connected to the CBL 2 channels and the current mode
setting. The bottom part lists the menu options.
Returns to the Main Screen.
Allows you to calibrate a sensor.
Sets a current sensor reading to zero.
Displays the Experiment Menu so you can save, reload, or
delete experiment files in the CBL 2 system's FLASH memory.
CBL 2™ S
YSTEM
© 2000, 2003 T
I
EXAS
NSTRUMENTS
I
NCORPORATED
Advertisement
Table of Contents
