Table of Contents
Advertisement
User tip: When editing a layout and making a selection in any of the items below, the
first Control Knob 'tap' clears the interface menu, and this 'tap' is not a 'selection' in the
layout setup parameter. A tap after clearing the menu will initiate the editing process
for the selected parameter.
• From menu list containing: THEME, COLORS, GAUGES, MSG GROUPS, COPY FROM
and RESET ALL and BACK,
Note: Follow the 'TAP' and 'HOLD' instructions in the Menu box as prompted
• Rotate to highlight GAUGES in the list, and tap knob to select
• Following the instruction popup on TFT, rotate knob
o While rotating, notice the editable areas will highlight on the GRAFIX Instrument
Cluster
o When the desired REGION is highlighted, tap to select
(This step is skipped for some Regions which only have one arrangement)
• Rotate to select the Arrangement
o While rotating, notice the available Arrangements for the selected Region
o When the desired ARRANGEMENT style is on the display, tap to select
(This step occurs only if an Arrangement has more than one 'gauge' area)
• Rotate until the desired gauge location is highlighted
o tap to edit the selected gauge location
• Rotate to select the Reading
o While rotating, notice that the available readings for that gauge are displayed
o When the desired READING is displayed, tap to select
(This step occurs only if Reading has multiple 'scales' to select from)
• Rotate to select the Scale
o While rotating, notice that the available scales for the selected reading will be
displayed
o When the desired SCALE is on the display, tap to select
Note: Depending on the selected Arrangement and Gauge, the Scale may be
available as either an analog or a digital readout.
• If an Arrangement has more than one available 'gauge'
o Repeat the above sequence for all of the available gauges
o Hold knob in when finished setting gauges to return to Arrangement selection
• Else if the region Arrangement only has one available 'gauge'
o The user will be directed to select the next Region
o Again, repeat the above until all display Regions are presented as desired
• Hold the knob in to exit out of the GAUGES sub-menu and return to LAYOUT <X> list
o After GAUGE setup, the menu list containing THEME, COLORS, GAUGES,
MSG GROUPS, COPY FROM and RESET ALL and BACK will return with
LAYOUT X (current layout being edited) still indicated at the top in the menu box
Note: Due to the configuration flexibility of the GRAFIX Instrument Cluster and the
user's ability to assign ARRANGEMENTS, GAUGES and READINGs, there can be
layout configurations that are not allowed or invalid. If the 'NOT SUPPORTED'
message appears in a gauge location, this indicates that the selected READING is
not available for the selected ARRANGEMENT. If this message appears, either select
a different READING in the GAUGE location, or select a different ARRANGEMENT in
the REGION.
29
MAN# 650814
Advertisement
Table of Contents
