Table of Contents
Advertisement
COLOR editing
This menu selection allows the user to change the daytime and nighttime display colors, by
either selecting a defined factory scheme, or by creating a color combination completely based
on user preference.
• From the MAIN-SYSTEM-LAYOUT-<LAYOUT X> menu, rotate the knob to COLORS, tap
the knob
• A menu with DAY&NIGHT, DAY MODE, NIGHT MODE, and BACK will appear
Do notice at the top of the menu box, LAYOUT 3 is still indicated
• With DAY&NIGHT highlighted, tap the knob
• Sub-menu will list: SCHEME, CUSTOMIZE, RESET COLOR, and BACK, Rotate the
knob to highlight the desired item, tap to select
o SCHEME: A list of 12 predefined color combinations for the items in
CUSTOMIZE below will be presented to the user as a specific SCHEME. As you
scroll the list, the gauges and readings on the Instrument Cluster will change to
the colors defined in that highlighted SCHEME. Tap to select, or select BACK to
return and retain the previous colors.
o CUSTOMIZE: A list of available colors from which the user can select for each of
the display parameters in the layout being edited. The current color is indicated
with an asterisk '*', and as the user scrolls through the available colors the
associated parameter on the GRAFIX display will change to the highlighted color,
tap the knob to select the color and return to the parameter list.
ACCENT: Graphical details on the some of the GRAFIX themes
LABEL: MPH, RPM x1000, VOLT, etc.
READING: Measured "values" i.e. "55" MPH, "15.5" VOLTS, etc.
SCALE: Scale 'ticks' and numerical scale values on analog gauges
POINTER/BAR (Pointer/Bar-gauge): Needle and bar-gauge
WARN IND (Warning Indicator): Analog gauge warning indicator
SWITCH: Illuminated center of rotary Control Knob
BACK:
***Notice that as the above are selected, the item will change colors as
the user scrolls through the color list.
o RESET COLOR: Return all the colors of selected layout to the factory defaults for
the current layout theme
o BACK: Will return to menu list containing: THEME, COLORS, GAUGES, MSG
GROUPS, COPY FROM and RESET ALL and BACK, (with LAYOUT 3 still
indicated at the top)
Note: DAY&NIGHT will set colors for both day and night operation to the same
colors. By selecting and setting DAY MODE and NIGHT MODE individually,
both modes can be set to their own color combination. Switching between
day and night modes on the GRAFIX system is controlled by the signal applied
to the DIM terminal on the Control Box, and is typically connected to the
headlight switch.
Note: The HI VIZ (high visibility) mode colors are set at the factory and cannot
be changed.
GAUGE Setup
The gauge setup sub-menu is where the user can configure the GRAFIX to display the
available system readings in their own preferred gauge style and location on the Instrument
Cluster. The best way to experience this unmatched flexibility is to go through the menus
below.
28
MAN# 650814
Advertisement
Table of Contents
