Table of Contents
Advertisement
SETUP sub-menu 'Quick view'
Below is the list of MAIN-SETUP sub-menu items. There is a brief description of use here, and there
is also popup guidance on the GRAFIX as the user steps through the sub-menus on the Instrument
Cluster with the Control Knob. For some of the items, find more descriptions and use in the Detailed
Instructions below.
The SETUP sub-menu is entered through the MAIN MENU and by tapping on the Control Knob when
SETUP is highlighted. An asterisk "*" will be displayed by the currently saved setting in each of the
menus. Selecting "BACK" will make no changes in the current menu and go will go back up one level
in the menu structure.
Note: When navigating through the various menus and sub-menus with the Control Knob,
many selections have popups on the GRAFIX TFT for the user to follow. Pay close attention
to menus and popup options as incorrect settings can cause faulty readings on the
Instrument Cluster.
SETUP
Sub-Menu
BLUETOOTH
{DEVICE}
OFF
SETUP ONLY
ALWAYS ON
BACK
CLOCK
MANUAL
GPS
BACK
SPEED
CAL TO GPS
AUTO CAL
ADJUST
SERVICE (500 – 7500)
UNIT (MPH, km/h)
INPUT
OUTPUT
BACK
TACH
INPUT
CYLINDER (BIM, 1 – 16)
TYPE (5V LOW, 12V HI)
BACK
UPDATE RATE
(SLOW, MID, FAST)
BACK
SIGNAL (SENSOR, BIM, GPS)
PULLUP (ON, OFF)
BACK
2K PPM or 4K PPM
BACK
Description____________________
Displays the system's device name in place of {DEVICE}
Disable Bluetooth connections
Allow Bluetooth connections only while in setup
Allow Bluetooth connections when key is on
Exit BLUETOOTH setup menu
Manually enter time
Clock will be set to the time received from satellite
Exit CLOCK setup menu
Calibrate speed by driving a measured mile or km
Adjust the speed calibration
Select the service countdown reset value
Select speed unit
Select between a wired sensor, BIM or GPS data
Select input pullup state
Exit INPUT setup menu
Select output speed signal PPM setting
Exit OUTPUT setup menu
Exit SPEED setup menu
Set engine cylinder count or BIM data input
Select RPM signal voltage level
Exit INPUT setup menu
Set RPM update rate
Exit UPDATE RATE setup menu
24
MAN# 650814
Advertisement
Table of Contents
