System Sub-Menu 'Quick View - Dakota Digital GRAFIX Installation And Operation Manual

SYSTEM sub-menu 'Quick view'

Below is the list of MAIN-SYSTEM sub-menu items. There is a brief description of use here, and
there is also popup guidance on the GRAFIX Instrument Cluster TFT as the user steps through the
sub-menus with the Control Knob. For most of the items, find more detailed descriptions and use in
the Detailed Instructions below.
The SYSTEM sub-menu is selectable in the MAIN MENU by tapping on SYSTEM when highlighted.
An asterisk "*" will be displayed by the currently saved setting in each of the sub-menus unless noted
otherwise. Selecting "BACK" will make no changes in the current menu and will go back up one level
in the menu structure.
Note: When navigating through the various menus and sub-menus with the Control Knob,
many selections have popups on the GRAFIX TFT for the user to follow. Pay close attention
to the menus and popup options as incorrect settings can cause faulty readings on the
Instrument Cluster.
SYSTEM Sub-Menu
LAYOUTS
LAYOUT X
Note: <LAYOUT #> in the list is the currently selected/displayed layout
THEME
COLORS
GAUGES
MSG GROUPS
COPY FROM
RESET ALL
BACK
DAY&NIGHT
SCHEME
CUSTOMISE
ACCENT,LABEL,READING,SCALE,POINTER/BAR,WARN IND,SWITCH
BACK
RESET COLOR
BACK
DAY MODE
NIGHT MODE
BACK
*Note: Settings for DAY MODE and NIGHT MODE are the same when the DAY&NIGHT
selection is used. In real time vehicle operation, the switching of the DAY and NIGHT
mode is controlled by the signal on the Control Box DIM terminal.
GROUP MAX
GROUP SET
BACK
LAYOUT 'list'
BACK
Description_____________________
List of 4 layouts that can to be edited
Allows selection from 1 of 4 installed themes
Allows custom selection of colors for day and/or night
Color setup for both day and night operation
List of 12 predefined color combinations available for layouts
List of 7 Instrument Cluster parameters
Exit CUSTOMISE
Reset all <LAYOUT #> parameters to factory defaults
Exit DAY&NIGHT
Color setup for daytime operation (see *Note below)
Color setup for night time operation (see *Note below)
Exit COLORS
See Gauge setup below in DETAILED INSTRUCTIONS
Select which display groups are available to the user
Groups: AB, ABC, ABCD, ABCDE are available
Select readings to be shown in each of the groups
Exit MSP GROUPS
List of layouts to available to copy from to this LAYOUT X
Exit COPY FROM layout selection list
Return all display settings to factory default
Exit LAYOUTS sub-menu
21 MAN# 650814