Table of Contents
Advertisement
SHIFT LIGHT
(2000 – 15000)
BACK
VOLT
WARN LO (10.0 – 13.1)
WARN HI (16.5 – 20.0)
BACK
WATER
INPUT
SENSOR
BIM
BACK
UNIT
F
C
BACK
WARNING (150-305F / 65 -152c)
BACK
OIL
INPUT (SENSOR PSI: 100, 150, 300 or from BIM)
WARN (LOW 5 – 36)
BACK
FUEL
INPUT
(MANUAL ADJ, GM 0-30, GM 0-90, 63 VETTE, GM 40-250, GM 250-40,
FORD 73-10, FORD 20-150, VDO 10-180, SW 240-33, IMPRT 112-4, BIM)
MANUAL ADJ -> PROGRAM
Back
RANGE
LEARN RESET
BACK
BIM
BACK
WARN
WARN OUT
OUTPUT SET (ON/OFF)
WARN AUDIO
BUZZER SET (ON/OFF)
BUZZER STYLE (0-10)
BUZZER VOL (0-10)
BUZZER TONE (1-3)
SPD CNT VOL
BACK
WARN LED
OUTPUT SET (ON/OFF)
BACK
DD
DD CUSTOM
OFFEST
BACK
Exit MANUAL ADJ.
(OFF, LOW, MID, HIGH)
Set RPM shift warning point
Exit TACH setup menu
Set low volt warning point
Set high volt warning point
Exit VOLT setup menu
Select between a wired sensor
Select standard Dakota Digital sensor
Select customized DD reading
Select offset to sensor reading (-20F - +20F or -11C - +11C)
Exit SENSOR menu
Select BIM data
Exit INPUT setup menu
Select Fahrenheit temperature units
Select Celsius temperature units
Exit UNIT setup menu
Set high temp warning point
Exit WATER setup menu
Select between a wired sensor or BIM data
Set low pressure warning point
Exit OIL setup menu
Select sensor type
Calibrate/manual adjust fuel sensor
Clear and restart learning range to empty
Exit FUEL setup menu
Menu options depend on BIM(s) attached.
Exit BIM setup menu
Select BIMs, gauges, misc. that trigger warn output
Select BIMs, gauges, misc. that trigger warn buzzer
Select style of audible tone
Select the warning buzzer volume
Select the warning buzzer sound
Select the speed-controlled volume setting
Exit the WARN AUDIO setup menu
Select BIMs, gauges, misc. that trigger warn LED
Exit WARN setup menu
25
MAN# 650814
Advertisement
Table of Contents
