Table of Contents
Advertisement
BACK
BACK
SWITCH
DURATION
VOLUME
TONE
SPD CNT VOL
BACK
UPDATE
AUTO UPD
DSP1, DSP2, etc.
BACK
THEME LOAD
STANDARD, PERF, etc.
BACK
START IMAGE
DEFAULT
CUSTOM
LOAD
BACK
MANUAL UPD
BOOT TEST
BACK
BACK
Note: You can exit the SYSTEM sub-menu at any time by switching off the keyed power to the Control Box. Any
setting changes that have been made will be saved.
voltage on each TFT module.
Exit DISPLAY sub-menu
Exit INFO sub-menu
Select length of Control Knob rotation tone
Select the sound level of the rotation tone
Select the frequency of the rotation tone
Select the tone level for monitoring speed counts
Exit SWITCH sub-menu
List of displays modules to select for auto update
Exit AUTO UPD sub-menu
List of themes to load to ALL display modules
Exit THEME LOAD sub-menu
Use the factory default start image
Use a loaded custom start image
Select a display to load custom start image to from the thumb drive
Exit START IMAGE sub-menu
Select a display to update software from the thumb drive
Run a display boot test
(diagnostic that may be needed for tech assistance)
Exit UPDATE sub-menu
Exit SYSTEM sub-menu, return to MAIN MENU
23
MAN# 650814
Advertisement
Table of Contents
