Table of Contents
Advertisement
Display Cable Replacement
Tools Required:
• Phillips screwdriver
• Stubby Phillips screwdriver
Time:
30 minutes
Disconnect Power Source
Unplug power cord from power outlet.
WARNING: Shock and electrocution hazard.
• Unplug unit and let sit 10 minutes before cleaning or performing maintenance.
• Electrical charge can remain in unit after unplugging.
• Keep water and liquids away from electrical parts.
Remove Rear Cover
1. Remove screws securing console assembly and console back cover to console weldment using a Phillips
screwdriver.
2. Remove grounding screw securing console assembly to console weldment using a Phillips screwdriver.
NOTE: Not all consoles include a grounding screw.
Remove Accessory Tray Bottom
1. Remove the three screws securing the accessory tray bottom to the accessory tray base using a Phillips
screwdriver.
2. Remove the accessory tray bottom
Item
1
2
3
4
Screw, Pan Head Phillips, M5 x 0.8 x 14
5
Grounding Screw, Pan Head Phillips, M5 x
Item
1
2
3
Screw, Pan Head Phillips, 6 x .50"
4
Screw, Pan Head Phillips, 8-16 x .50"
Page 27 of 79
Description
Console Assembly
Console Weldment
Console Back Cover
0.8 x 14
Description
Accessory Tray Bottom
Accessory Tray Top
Qty
1
1
1
4
1
Qty.
1
1
2
1
Advertisement
Table of Contents
