Table of Contents
Advertisement
Front Foot Plate Arm Replacement
Tools Required:
• Phillips screwdriver
• 3/16" Allen wrench
• 5/32" Allen wrench
• 7/32" Allen wrench
• Torque wrench
• Rubber mallet
Time:
30 minutes
Disconnect Power Source
Unplug power cord from power outlet.
WARNING: Shock and electrocution hazard.
• Unplug unit and let sit 10 minutes before cleaning or performing maintenance.
• Electrical charge can remain in unit after unplugging.
• Keep water and liquids away from electrical parts.
Remove front arm handle linkage
1. Remove screw, flat washer, cap, and spacer securing arm handle linkage using a 3/16" Allen wrench.
2. Remove arm handle linkage from handle.
Remove foot plate assembly
1. Remove both SHCS and washers securing foot plate using a 5/32" Allen wrench.
1
2
3
4
5
6
Item
1
2
3
4
5
Page 51 of 79
Description
Screw
Flat washer
Cap
Spacer
Arm handle linkage
Handle
Description
SHCS
Washer
Foot plate
Front foot plate shaft
Rear foot plate shaft
Qty.
1
1
1
1
1
1
Qty.
2
2
1
1
1
Advertisement
Table of Contents
