Table of Contents
Advertisement
Check for Console Power - Integrity SL
The Integrity SL console is powered by a rechargeable 6-volt battery. Check the battery by pressing the Go / Green
Arrow button. The console should beep and light up. If a prompt doesn't appear, mount the unit and begin pedaling.
The console should light up and programming a workout should be possible. Pedal for 10 - 20 minutes at 50 rpm or
faster during a workout for optimum battery charging. The pedal action during workouts keeps the battery charged.
Optional external power supply can be used. If the unit is externally powered, battery maintenance is automatic and
pedaling is not required. Use only the power supply provided by Life Fitness to insure against unsafe operation.
Cable TV Hook Up
The console can receive both analog and digital signals. LIFE FITNESS is not responsible for the installation of CATV
service or components required for the delivery of CATV service. An external TV signal input via a 75-ohm coaxial
cable must be present before TV setup can occur.
Note to the CATV Installer: This reminder is provided to call the CATV system installer's attention to Article 820-40
of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building as close to the point of cable entry as practical.
Page 9 of 51
Advertisement
Table of Contents
