Table of Contents
Advertisement
The module CD8080(I) contains the subassembly CD8055(I) NEO and the PC-Link to RS422 conversion inter-
face. The module is compatible only with NEO Alarm Control Unit models HS2128, HS2064, HS2032 and
HS2016 software versions 1.1 and above.
HSPA/CDMA 3G Module - 3G8080(I)/CD8080(I)
The HSPA/CDMA module enables wireless reporting of all alarms and other system events from the DSC
Neo control panel using an all-digital, HSPA/CDMA wireless (cellular) network. The module can be used as
the primary communication path for all alarm signaling, or as a backup to a telephone connection to the central
monitoring station. The wireless alarm signaling and routing service is operated by Alarm.com. The
HSPA/CDMA module also features integrated support for Alarm.com's home automation solution with built- in
Z-Wave capabilities. A 3G8080(I) or CD8080(I) is required to support the Alarm.com Image Sensor.
Note: Alarm.com's home automation solution with built-in Z-Wave capabilities is not UL/ULC evaluated.
Contact Information
For additional information and support on Alarm.com modules, initial account setup, home automation, and all
other Alarm.com products and services, please visit: www.Alarm.com/dealer or contact Alarm.com technical
support at: 1-866-834-0470.
Features
128-bit AES encryption via cellular and Internet (NIST validation certificate number: 3162).
l
Back up or primary cellular alarm communication.
l
Automatically switches to 2G (EDGE/GPRS) if HSPA(3G) service is not available.
l
Full event reporting to central station (UL/ULC listed).
l
Cellular periodic test transmission.
l
Integrated call routing.
l
Remote firmware upgrade capability of the communicator and panel firmware via cellular.
l
Panel remote uploading/downloading support via cellular.
l
PC-LINK connection.
l
Programmable labels.
l
SIA and Contact ID (CID) formats supported.
l
Signal strength and trouble display LEDs.
l
Subscriber Identity Module (SIM) card included with communicator.
l
Supervision heartbeats sent via cellular.
l
2-way audio capable when used with audio module HSM2955(R) - Refer to HSM2955(R) manual
l
Communicator Ratings
Model
Power Supply Ratings
Input Voltage
Current Consumption
Standby Current
Alarm (Transmitting) Current
Cellular Network
Operating Frequency
Environmental Specifications
Operating Temperature
Storage Temperature
3G8080(I)
11.3V - 12.5V DC
100mA@12V (I)
200mA@12V (I)
HSPA 3G
850, 1900, 2100MHz
14°F to 131°F (-10°C to 55°C)
UL/ULC verified operation for 32°F-120°F (0°C-49°C) only
-30°F to 140°F (-34°C to 60°C)
- 8 -
CD8080(I)
100mA@12V (I)
200mA@12V (I)
CDMA
850, 1900, 2100MHz
Advertisement
Table of Contents
