Starting To Move - Hitachi ZW140-6 Operator's Manual

Starting to Move

d
WARNING: Start to move the machine only after
checking that no personnel and/or obstacles are
present around the machine.
Never turn ride control switch (3) to ON position
when traveling the machine or raising the bucket.
Before turning the ride control switch (3) ON, stop the
machine and confirm the safety around the bucket.
Avoid turning ride control switch (3) to ON position
while traveling the machine. Failure to do so may
automatically move the lift arm up or down.
Refer to page 1-79 for detailed information of ride control
switch (3).
1. Check that none of the warning indicators except
parking brake indicator (1) on the monitor panel is ON.
2. Set the front attachment in the driving position by
operating control lever (2).
3. Turn neutral lever lock (4) to the UNLOCK (
DRIVING MACHINE
2
) position.
4-2
A Driving Position (A)
ZW140-6: 350~400 mm (13.8~15.7 in)
ZW150-6/150PL-6: 420~470 mm (16.5~18.5 in)
4
1
MPTC-01-019 MPTC-01-019
3
MNDB-01-005
MPD8-04-002
MNDB-01-002