Multi-Function Joystick Lever - Hitachi ZW140-6 Operator's Manual

Multi-Function Joystick Lever

The multi-function joystick lever is used to operate the lift arm
and/or bucket.
Lever
Position
Float:
C The lift arm free falls and can be moved as
loads are applied.
B Lift Arm Lower
Hold:
N The lift arm is stopped and held in that
position.
A Lift Arm Raise
Detent:
F
The lift arm is held in the raise position.
Detent:
When the multi-function joystick lever is
G moved from the bucket dump position to
the bucket tilt position, the multi-function
joystick lever is maintained in this position.
Bucket Tilt:
D The bucket is tilted back, taking the
transportation position.
Hold:
N The bucket is stopped and held in that
position.
Bucket Dump:
E The bucket is tilted forward to dump the
bucket load.
OPERATOR'S STATION
Bucket Operation
C
B
N
D
G
D
1-66
E
A
F
MNEC-01-059
C
B
E
N
A
M4GB-01-074
M4GB-01-073