Inspection/Maintenance Access Side Cover - Hitachi ZW140-6 Operator's Manual

Inspection/Maintenance Access Side Cover

d
CAUTION:
 Always close side covers (1) during driving and
operation.
 Do not keep side covers (1) open on a slope or when
a strong wind is blowing. Failure to do so may be
dangerous because side covers (1) may unexpectedly
close.
 Take care not to pinch your fingers when opening/
closing side covers (1).
 When side covers (1) are opened, side covers (1) may
move suddenly. Be careful not to come in contact
with side covers (1).
 Before inspecting around the engine, be sure to
secure side covers (1) with holding rod (4).
 In case the machine is equipped with fenders (2) on
side covers (1), never ride on fenders (2).
When opening side covers (1), pull latch (3).
f
NOTE: When required to inspect the machine for a long time
with side cover (1) kept open, lock side cover (1) using holding
rod (4) provided inside side cover (1).
Side cover (1) has a holding groove. Engage holding rod (4) in
the holding groove beforehand.
MAINTENANCE
7-10
1 2
MPTC-01-009
3
4
MPTC-01-018