Aftertreatment Device Regeneration Inhibited - Hitachi ZW140-6 Operator's Manual

Aftertreatment Device Regeneration Inhibited

IMPORTANT: The aftertreatment device regeneration
can be inhibited to prevent auto regeneration while
operating the machine in a dusty area or indoors.
When aftertreatment device regeneration switch (1) is in
regeneration inhibited (4) position, the auto regeneration will
not be performed. At the same time, aftertreatment device
regeneration inhibited indicator (8) on the monitor screen will
be light.
IMPORTANT: When the machine is operated with the
aftertreatment device regeneration inhibited, the
aftertreatment device becomes clogged. When
the aftertreatment device regeneration request
is displayed, move the machine to a safe place.
Perform the manual regeneration following the
specified procedure. Failure to do so may damage the
aftertreatment device. Refer to "Manual Regeneration
Procedure" section for the manual regeneration.
When aftertreatment device regeneration inhibited warning
indicator (7) is lit while aftertreatment device regeneration
switch (1) is in regeneration inhibited (4) position, the manual
regeneration is needed. Perform manual regeneration
following the specified procedure.
OPERATOR'S STATION
1-78
1
MNDB-01-005
1
4
MNDF-01-023
7
8
MPTC-01-019