Midea MCHC70J72 User Manual page 27

Fix the brackets:
Drill at the marked points (1) (2) (3), using a Φ10 mm drill bit.
●
Insert the wall plugs into the holes (1) (2) (3).
●
Fix the cooker hood fixing bracket (component 20) with 3 screws (component 10)
●
(5 x 50) provided.
Fix he chimney fixing bracket (component 21) with 2 screws (component 10) (5 x 50)
●
provided.
Hook the Cooker Hood Body
Open the panel.
●
Remove the metal grease filter using the handles provided.
●
Hook the cooker hood body to the cooker hood fixing bracket.
●
Level the cooker hood body.
●
Right
From the inside of the cooker hood body, fix the screws to wall plug at points (3).
●
Fit the filter into the cooker hood.
●
Close the panel.
●
Connections
Ducted Type Ventilation System
When installing the ducted type ventilation cooker hood, connect the appliance to the
chimney using either a flexible or rigid pipe Φ150 or Φ120 mm. Options shall leave to the
user according to their actual needs.
To install a Φ120 mm air exhaust connection, insert the
●
reducer flange to the cooker hood body ventilation outlet.
Fix the pipe in position.
●
Remove the activated charcoal filters(If any).
●
Wrong
08
ɸ150
ɸ120