Flash Comp; Switching The Screen Display (Shooting) - Sony Cyber-shot RX10 II How To Use Manual

Help Guide
separately) to the product, and shoot with a wireless flash (sold separately), placed away
from the product.
Note
The default setting depends on the shooting mode.
Available flash mode depends on the shooting mode.
The [Wireless] setting cannot be used with the camera's internal flash.
[53] How to Use

Flash Comp.

Adjusts the amount of flash light in a range of –3.0 EV to +3.0 EV.
Flash compensation changes the amount of flash light only. Exposure compensation
changes the amount of flash light along with the change of the shutter speed and aperture.
1. MENU →
Selecting higher values (+ side) makes the flash level higher, and lower values (– side)
makes the flash level lower.
Note
[Flash Comp.] does not work when the shooting mode is set to the following modes:
[Intelligent Auto]
[Superior Auto]
[Sweep Panorama]
[Scene Selection]
The higher flash effect may not be visible due to the limited amount of flash light
available, if the subject is outside the maximum range of the flash. If the subject is very
close, the lower flash effect may not be visible.
[54] How to Use

Switching the screen display (Shooting)

You can change the display contents on the screen.
1. Press the DISP (Display Setting) button.
file:///Z|/15-1h_HG/Kaihan_20151021_FV-ZV/Nouhin/Web/4574925122.w/en/print.html[10/27/2015 6:18:47 PM]
Using shooting functions
(Camera Settings) → [Flash Comp.] → desired setting.
Using shooting functions
Using the flash
Selecting a screen display mode