Table of Contents
Advertisement
as a moving car or a walking person.
Wireless:
Allows you to shoot by removing the remote control-compatible external flash (sold
separately) and using it at a distance from the camera. The shading effect gives the subject
a more three-dimensional feel.
Note
The default setting depends on the shooting mode.
Available flash mode depends on the shooting mode.
[52] How to Use
Flash Comp.
Adjusts the amount of flash light in a range of –3.0 EV to +3.0 EV.
Flash compensation changes the amount of flash light only. Exposure compensation
changes the amount of flash light along with the change of the shutter speed and aperture.
1. MENU →
Selecting higher values (+ side) makes the flash level higher, and lower values (– side)
makes the flash level lower.
Note
The higher flash effect may not be visible due to the limited amount of flash light
available, if the subject is outside the maximum range of the flash. If the subject is very
close, the lower flash effect may not be visible.
[53] How to Use
FEL Lock
The flash level is automatically adjusted so that the subject gets the optimum exposure
during normal flash shooting. You can also set the flash exposure in advance.
FEL: Flash Exposure Level
1. Center the subject on which FEL is to be locked, and adjust the focus.
Using shooting functions
(Camera Settings) → [Flash Comp.] → desired setting.
Using shooting functions
Using the flash
Using the flash
Advertisement
Table of Contents
