Demo Mode - Sony Cyber-shot RX10 II How To Use Manual

Help Guide
Note
If you insert a memory card that has previously been formatted with a different video
system, a message telling you that you must reformat the card will appear.
If you want to record using another system, re-format the memory card or use another
memory card.
When you perform [NTSC/PAL Selector], and the setting is changed from the default one,
a message "Running on NTSC." or "Running on PAL." will appear on the start-up screen.
[189] How to Use

Demo Mode

The [Demo Mode] function displays the movies recorded on the memory card automatically
(demonstration), when the camera has not been operated for a certain time. Normally select
[Off].
1. MENU →
Menu item details
On:
The movie playback demonstration starts automatically if the product is not operated for
about one minute. Only protected AVCHD movies are played back.
Set the view mode to [AVCHD View], and protect the movie file with the oldest recorded
date and time.
Off:
Does not show the demonstration.
Note
You can set this item only when the product is powered by the AC Adaptor (supplied).
Even if [On] is selected, the product does not start a demonstration if there is no movie file
on the memory card.
When [On] is selected, the product does not switch to power save mode.
[190] How to Use
TC/UB Settings
file:///Z|/15-1h_HG/Kaihan_20151021_FV-ZV/Nouhin/Web/4574925122.w/en/print.html[10/27/2015 6:18:47 PM]
Changing settings
(Setup) → [Demo Mode] → desired setting.
Changing settings
Setup menu
Setup menu