Flash Comp - Sony a9 II Help Manual

Interchangeable lens digital camera
Table of Contents

Advertisement

Note
• The default setting depends on the shooting mode.
• Some [Flash Mode] settings are not available, depending on the shooting
mode.

Flash Comp.

Adjusts the amount of flash light in a range of –3.0 EV to +3.0 EV.
Flash compensation changes the amount of flash light only. Exposure
compensation changes the amount of flash light along with the change of
the shutter speed and aperture.
MENU 
setting.
• Selecting higher values (+ side) makes the flash level higher, and lower
values (- side) makes the flash level lower.
Note
• [Flash Comp.] does not work when the shooting mode is set to the following
modes:
– [Intelligent Auto]
• The higher flash effect (+ side) may not be visible due to the limited amount
of flash light available, if the subject is outside the maximum range of the
flash. If the subject is very close, the lower flash effect (- side) may not be
visible.
• If you attach an ND filter to the lens or attach a diffuser or a color filter to the
flash, the appropriate exposure may not be achieved and images may turn
out dark. In this case, adjust [Flash Comp.] to the desired value.
GB
140
 (Camera Settings 1)  [Flash Comp.]  desired

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ilce-9m2

Table of Contents