Panorama: Size; Panorama: Direction - Sony Cyber-shot RX10 II How To Use Manual

Help Guide
[Standard] is higher than that of [Fine], the file size of [Standard] is smaller than that of
[Fine]. This will allow more files to be recorded on 1 memory card, but the image quality will
be lower.
About RAW images
To open a RAW image file recorded with this camera, the software Image Data Converter
is needed. With Image Data Converter, you can open a RAW image file, then convert it
into a popular image format such as JPEG or TIFF, or readjust the white balance,
saturation or contrast of the image.
You cannot apply [Auto HDR] or [Picture Effect] functions with RAW images.
Note
If you do not intend to edit the images on your computer, we recommend that you record
in JPEG format.
You cannot add DPOF (print order) registration marks to RAW images.
[61] How to Use

Panorama: Size

Sets the image size when shooting panoramic images. The image size varies depending on
the [Panorama: Direction] setting.
1. MENU →
Menu item details
When [Panorama: Direction] is [Up] or [Down]
Standard: 3872×2160
Wide: 5536×2160
When [Panorama: Direction] is [Left] or [Right]
Standard: 8192×1856
Wide: 12416×1856
[62] How to Use

Panorama: Direction

Sets the direction to pan the camera when shooting panoramic images.
file:///Z|/15-1h_HG/Kaihan_20151021_FV-ZV/Nouhin/Web/4574925122.w/en/print.html[10/27/2015 6:18:47 PM]
Using shooting functions
(Camera Settings) → [Panorama: Size] → desired setting.
Using shooting functions
Selecting still image size/image quality
Selecting still image size/image quality