Memory Recall - Sony Cyber-shot RX10 II How To Use Manual

Help Guide
Hint
Images shot in [BULB] mode tend to be blurry. We recommend that you use a tripod or a
remote commander (sold separately) that has a shutter button lock function.
[40] How to Use

Memory recall

Allows you to shoot an image after recalling often-used modes or camera settings registered
in advance.
1. Set the mode dial to MR (Memory recall).
2. Press the left/right side of the control wheel or turn the control wheel to select the
desired number, then press
You can also recall registered modes or settings by selecting MENU →
(Camera Settings) → [Memory recall].
Note
Register shooting settings in advance by [Memory].
If you set [Memory recall] after completing the shooting settings, the registered settings
are given priority and the original settings may become invalid. Check the indicators on
the screen before shooting.
[41] How to Use
Movie
You can adjust the shutter speed or aperture value to your desired settings for recording
movies. You can also check the image angle before shooting.
1. Set the mode dial to
2. MENU →
When [Mode Dial Guide] is set to [On], you can select the desired settings after you
have changed the position of the mode dial.
file:///Z|/15-1h_HG/Kaihan_20151021_FV-ZV/Nouhin/Web/4574925122.w/en/print.html[10/27/2015 6:18:47 PM]
Shooting Selecting a shooting mode
on the center.
Shooting Selecting a shooting mode
(Movie).
(Camera Settings) → [Movie] → desired setting.