Flash Comp - Sony ILCE-9M3 Help Manual

Help Guide
Interchangeable Lens Digital Camera
ILCE-9M3
α9III

Flash Comp.

Adjusts the amount of flash light in a range of –3.0 EV to +3.0 EV. Flash compensation changes the amount of flash light
only. Exposure compensation changes the amount of flash light along with the change of the shutter speed and aperture.
MENU → (Exposure/Color) → [Flash] → [Flash Comp.] → desired setting.
1
Selecting higher values (+ side) makes the flash level higher, and lower values (- side) makes the flash level
lower.
Hint
By assigning [Flash Comp.] to the desired dial in [
output when shooting with TTL exposure.
Note
[Flash Comp.] does not work when the shooting mode is set to the following modes:
[Intelligent Auto]
The higher flash effect (+ side) may not be visible due to the limited amount of flash light available, if the subject is outside the
maximum range of the flash. If the subject is very close, the lower flash effect (- side) may not be visible.
If you attach an ND filter to the lens or attach a diffuser or a color filter to the flash, the appropriate exposure may not be achieved
and images may turn out dark. In this case, adjust [Flash Comp.] to the desired value.
Related Topic
Using flash (sold separately)
Assigning frequently used functions to buttons and dials (Custom Key/Dial Set.)
Custom Key/Dial Set.] or [My Dial Settings], you can easily adjust the flash
5-056-662-11(1) Copyright 2023 Sony Corporation
349
TP1001150373