Sweep Panorama - Sony Cyber-shot RX10 II How To Use Manual

Help Guide
Note
According to the brightness of the environment, the program shift may not be used.
Set the shooting mode to another one than "P" or turn off the power to cancel the setting
you made.
When the brightness changes, the aperture (F-value) and shutter speed also change
while maintaining the shift amount.
[34] How to Use

Sweep Panorama

Allows you to create a single panoramic image from multiple images shot while panning the
camera.
1. Set the mode dial to
2. Point the camera at the subject.
3. While pressing the shutter button halfway down, aim the camera at one end of the
desired panoramic composition.
(A) This part will not be shot.
4. Press the shutter button fully down.
5. Pan the camera to the end of the guide in the direction of the arrow on the monitor.
file:///Z|/15-1h_HG/Kaihan_20151021_FV-ZV/Nouhin/Web/4574925122.w/en/print.html[10/27/2015 6:18:47 PM]
Shooting Selecting a shooting mode
(Sweep Panorama).