Sony Cyber-shot RX10 II How To Use Manual page 103

Help Guide
[Watercolor], or [Illustration].
The [DRO/Auto HDR] is set to [Auto HDR].
[ISO] is set to [Multi Frame NR].
[Smile Shutter] is being used.
Hint
To hold the focus and exposure during burst, change the following settings.
Set [Focus Mode] to [Continuous AF].
Set [
[90] How to Use
shooting/Self-timer)
Spd Priority Cont.
The product continues to shoot as long as the shutter button is pressed. You can
continuously shoot at a rate faster than that of [Cont. Shooting].
1. MENU→
Note
Between continuous shooting frames, an image of each frame is immediately displayed.
Continuous shooting is unavailable in the following situations:
The shooting mode has been set to [Sweep Panorama].
The shooting mode is set to [Scene Selection] and a scene other than [Sports Action] is selected.
The [Picture Effect] is set to [Soft Focus], [HDR Painting], [Rich-tone Mono.], [Miniature],
[Watercolor], or [Illustration].
The [DRO/Auto HDR] is set to [Auto HDR].
[ISO] is set to [Multi Frame NR].
[Smile Shutter] is being used.
Hint
In [Spd Priority Cont.] mode, the focus is determined when you press the shutter button
halfway down for the first image, and locked for subsequent shots. However, the camera
can continue adjusting the exposure for subsequent shots. To keep adjusting the
exposure throughout the continuous shooting, set the settings as follows:
Set [
file:///Z|/15-1h_HG/Kaihan_20151021_FV-ZV/Nouhin/Web/4574925122.w/en/print.html[10/27/2015 6:18:47 PM]
AEL w/ shutter] to [Off] or [Auto].
Using shooting functions
(Camera Settings) → [Drive Mode] → [Spd Priority Cont.].
AEL w/ shutter] to [Auto] or [Off].
Selecting a drive mode (Continuous