You Cannot Record Images; Recording Takes A Long Time - Sony Cyber-shot RX10 II How To Use Manual

Help Guide

You cannot record images.

You are using a memory card with a write-protect switch, and the switch is set to the
LOCK position. Set the switch to the record position.
Check the free capacity of the memory card.
You cannot record images while charging the flash.
The [Self-timer] is activated.
Set [Release w/o Card] to [Enable]. However, without a memory card inserted in the
camera, images cannot be recorded.
[281] Troubleshooting
There is a clacking sound when the brightness of the
subject changes.
The functioning of the ND filter inside the lens produces audio and image disturbances.
This is not a malfunction.
[282] Troubleshooting

Recording takes a long time.

The noise reduction function is processing an image. This is not a malfunction.
You are shooting in RAW mode. Since RAW data files are large, RAW mode shooting
may take time.
The [Auto HDR] function is processing an image.
The product is compiling images.
[283] Troubleshooting
The same image is captured multiple times.
Set the drive mode to [Single Shooting].
file:///Z|/15-1h_HG/Kaihan_20151021_FV-ZV/Nouhin/Web/4574925122.w/en/print.html[10/27/2015 6:18:47 PM]
Troubleshooting Shooting still images/movies
Troubleshooting Shooting still images/movies
Troubleshooting Shooting still images/movies