You Cannot Insert The Battery Pack Into The Product - Sony Cyber-shot RX10 II How To Use Manual

Help Guide
Wi-Fi, the Wi-Fi logo, Wi-Fi Protected Setup are registered trademarks or trademarks of
the Wi-Fi Alliance.
The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United
States and in other countries.
DLNA and DLNA CERTIFIED are trademarks of Digital Living Network Alliance.
Eye-Fi is a trademark of Eye-Fi Inc.
In addition, system and product names used in this manual are, in general, trademarks or
registered trademarks of their respective developers or manufacturers. However, the ™
or ® marks may not be specified in all cases in this manual.
[272] Troubleshooting
Troubleshooting
If you experience trouble with the product, try the following solutions.
1. Check the items under "Troubleshooting", then check the product.
If a message such as "C/E:□□:□□" appears on the screen, refer to the self-diagnosis
display.
2. Remove the battery pack, wait for about one minute, re-insert the battery pack, then
turn on the power.
3. Initialize the settings.
4. Consult your dealer or local authorized service facility. Additional information on this
product and answers to frequently asked questions can be found at our Customer
Support Website.
http://www.sony.net/
[273] Troubleshooting

You cannot insert the battery pack into the product.

Make sure the direction of the battery pack is correct, and insert it until the battery lock
file:///Z|/15-1h_HG/Kaihan_20151021_FV-ZV/Nouhin/Web/4574925122.w/en/print.html[10/27/2015 6:18:47 PM]
If you have problems
Troubleshooting Battery pack and power
If you have problems