Table of Contents
Advertisement
Chapter 7: BIOS
Power Button Mode
This option allows you to change the function of the chassis power
button. The settings are On/Off and Suspend. When set to Suspend,
depressing the power button when the system is up will cause it to
enter a suspend state.
Sleep Button Enable
This option allows you to enable the use of a sleep button that can be
connected to the serverboard.
The settings are Disabled and Sus-
pend.
Video Power Down
This option specifies the power state that the VGA video subsystem
enters after the specified period of display inactivity has expired. The
settings include Disabled, Standby, Suspend and Sleep.
Suspend Timeout (Minutes)
This option specifies the length of hard disk inactivity time that should
expire before entering the power conserving state.
The settings are
Off, 1, 2, 3, 4, 5, 6, 7, 8, 9 and 10 (minutes).
7-19
Advertisement
Table of Contents
