Serverboard Features - Supermicro 7044H-T User Manual

S S
UPER ERVER 7044H-T/7044H-TR User's Manual
1-2

Serverboard Features

At the heart of the SuperServer 7044H-T/7044H-TR lies the X6DHT-G, a dual
processor serverboard based on the Intel E7520 chipset and designed to provide
maximum performance. Below are the main features of the X6DHT-G. (See Figure
1-1 for a block diagram of the E7520 chipset).
Processors
The X6DHT-G supports single or dual 604-pin Intel Xeon EM64T type processors at
a FSB speed of 800 MHz. Please refer to the serverboard description pages on our
web site for a complete listing of supported processors (www.supermicro.com).
Memory
The X6DHT-G has eight 184-pin DIMM slots that can support up to 16 GB of reg-
istered ECC DDR333 or up to 32 GB of registered ECC DDR266 SDRAM. The
memory is an interleaved confi guration, which requires modules of the same size
and speed to be installed in pairs.
Serial ATA
A Marvell SATA controller is integrated into the X6DHT-G to provide an eight-port
Serial ATA subsystem, which is RAID 0 and 1 supported. The 6300ESB South
Bridge of the chipset also includes a Serial ATA controller that supports two
SATA ports (RAID 0 and 1 supported). The Serial ATA drives are hot-swappable
units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the Serial ATA drives.
PCI Expansion Slots
The X6DHT-G has six PCI expansion slots, which includes two x8 PCI-Express
slots, one 64-bit 133 MHz PCI-X slot, two 64-bit 100 MHz PCI-X slots and one 32-bit
33 MHz PCI slot. (One 100 MHz PCI slot supports Zero Channel RAID.)
1-2