Supermicro 7044H-T User Manual page 83

Hardware Monitor Logic
CPU Temperature Threshold
This option allows the user to set a CPU temperature threshold that will
activate the alarm system when the CPU temperature reaches this pre-set
temperature threshold. The options are 85
Highlight this and hit <Enter> to see monitor data for the following items:
CPU1 Temperature: This item displays CPU1 Temperature.
CPU2 Temperature: This item displays CPU2 Temperature.
System Temperature: This item displays the System Temperature.
Fan Speed Control Modes
This feature allows the user to decide how the system controls the speeds of the
onboard fans. If the option is set to "3-pin fan", the fan speed is controlled based
upon the CPU die temperature. When the CPU die temperature is higher, the fan
speed will be higher as well. If the option is set to "4-pin", the fan speed will be
controlled by the Thermal Management Settings pre-confi gured by the user at this
feature. Select "3-pin" if your chassis came with 3-pin fan headers. Select "4-pin" if
your chassis came with 4-pin fan headers. Select "Workstation" if your system is
used as a Workstation. Select "Server" if your system is used as a Server. Select
"Disable" to disable the fan speed control function to allow the onboard fans to run
at the full speed (12V) at all time. The Options are: 1. Disable, 2. 3-pin (Server),
3. 3-pin (Workstation), 4. 4-pin (Server), 5. 4-pin (Workstation).
CHS Fan 1 - CHS FAN8: If the feature of Auto Fan Control is enabled, BIOS will
automatically display the status of the fans indicated in this item.
Vcore A/Vcore B: These items display the Voltage status of CPU A and CPU B.
P3V3: This item displays the +3.3V voltage status.
P5V: This item displays the +5V voltage status.
N12V: This item displays the -12V voltage status.
P12V: This item displays the +12V voltage status.
VDD: This item displays the VDD status.
P5Vsb: This item displays the voltage status of +5V Standby power.
o o o
C, 90 C, 95 C and 100
7-17
Chapter 7: BIOS
o
C.