Appendix C: System Specifi Cations - Supermicro 7044H-T User Manual

Supermicro superserver 7044h-t servers: user guide
Table of Contents

Advertisement

Appendix C: System Specifi cations
Appendix C
System Specifi cations
Processors
Single or dual Intel® Xeon™ 604-pin processors to 3.60 GHz at a front side
(system) bus speed of 800 MHz.
Note: Please refer to our web site for a complete listing of supported processors.
Chipset
Intel E7520 chipset
BIOS
8 Mb Phoenix® Flash ROM
Memory Capacity
Eight 184-pin DIMM sockets supporting up to 32 GB of DDR266 or up to 16
GB of DDR333 SDRAM
Note: Dual channel memory - requires memory to be installed two modules at a time. See the
memory section in Chapter 5 for details.
Serial ATA Controller
• Marvell controller for 8-port Serial ATA (RAID 0, 1 and JBOD supported)
• Intel 6300ESB on-chip controller for 2-port Serial ATA (RAID 0,1 and JBOD
supported)
Serial ATA Drive Bays
Eight (8) hot-swap drive bays to house eight (8) standard 1" Serial ATA
drives
Peripheral Drive Bays
One (1) 3.5" fl oppy drive
Two (2) 5.25" drive bays
Expansion Slots
Two PCI-Express 8x slots, one 64-bit 133 MHz PCI-X slot, two 64-bit 100 MHz
PCI-X slots and one 32-bit 33 MHz PCI slot
C-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

7044h-tr

Table of Contents