Preface; About This Manual; Manual Organization - Supermicro 7044H-T User Manual

About This Manual

This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperServer 7044H-
T/7044H-TR. Installation and maintainance should be performed by experienced
technicians only.
The SuperServer 7044H-T/7044H-TR is a high-end server based on the SC743T-
650/SC743T-R760 tower/4U rackmount chassis and the X6DHT-G, a dual processor
serverboard that supports Intel
speed of 800 MHz and up to 16/32 GB of registered ECC DDR333/266 SDRAM.

Manual Organization

Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the X6DHT-G serverboard and
the SC743T-650/SC743T-R760 chassis, which comprise the SuperServer 7044H-
T/7044H-TR.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 7044H-
T/7044H-TR into a rack and check out the server confi guration prior to powering
up the system. If your server was ordered without processor and memory com-
ponents, this chapter will refer you to the appropriate sections of the manual for
their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.

Preface

® TM
Xeon processors at a Front Side (System) Bus
iii
Preface