Appendix B System Specifi Cations - Supermicro 8028B-TR4F User Manual

Appendix B: System Specifi cations
Appendix B
System Specifi cations
Processors
Quad Intel Intel E7-8800 v3/v4 or E7-4800 v3/v4 series series (Socket R1 type)
processors
Note: In order to install the Intel E7-8800 v4 or E7-4800 v4 series CPU, you must make
sure that BIOS 2.0 version is installed to your system.
Note: You must install at least two processors for full I/O functions to be supported.
Note: Please refer to our web site for a complete listing of supported processors.
Chipset
One Intel PCH C602J chipset
BIOS
128 Mb SPI AMI BIOS® SM Flash BIOS
Memory Capacity
The X10QBL-4(CT) serverboard supports thirty-two (32) 288-pin DIMM
sockets that can support up to 1TB of Registered (RDIMM) or up to 4TB
of Load Reduced (3DS LRDIMM) ECC DDR4 1866/1600/1333 MHz speed
S D R A M i n a t w o - c h a n n e l m e m o r y b u s w i t h m e m o r y s i z e s o f
4GB, 8GB, 16GB, 32GB, 64GB and 128GB size @ 1.2V voltages.
Note: 128 GB can only be supported with 3DS LRDIMM's.
SAS/SATA Controller
Intel PCH C602J on-chip controller for six-port SATA subsystem (two SATA
3.0 and four SATA 2.0 ports), which is RAID 0, 1, 5 and 10 Windows/LINUX
supported. The SATA drives are hot-swappable units.
A LSI 3008 SAS controller is integrated into the X10QBL-4CT serverboard
to provide an eight port SAS (Serial Attached SCSI) subsystem, which is
RAID 0, 1 and 10 supported (8028B-C0R4FT server only). The SAS drives are
hot-swappable units.
B-1