Monitoring Settings; Setting Utility; Using Epson Status Monitor 3 - Epson LQ-690II User Manual

Monitoring settings

Settings
EPSON Status Monitor 3
Monitoring Preferences

Setting Utility

Settings
Bi-D Adjustment
Printer Setting

Using EPSON Status Monitor 3

EPSON Status Monitor 3 allows you to monitor your printer's status, alerts you when printer errors
occur, and provides troubleshooting instructions when needed.
EPSON Status Monitor 3 is available when:
❏ The printer is connected directly to the host computer via the parallel port [LPT1] or the USB
port or connected to an Ethernet network.
❏ Your system is configured to support bidirectional communication.
You can install EPSON Status Monitor 3 by selecting it when you set up the printer. If you need to
install it, see "Installing EPSON Status Monitor 3" on page 58. When sharing the printer, be sure
to set EPSON Status Monitor 3 so that the shared printer can be monitored on the printer server
and clients. See "Setting up EPSON Status Monitor 3" on page 58 and "Setting Up Your Printer on
a Network" on page 65.
Explanations
You can access EPSON Status Monitor 3 when you click this button. To
monitor the printer, make sure the Monitor the printing status check box
is selected.
Click this button to open the Monitoring Preferences dialog box where
you can make settings for EPSON Status Monitor 3. See "Setting up EPSON
Status Monitor 3" on page 58 for more information.
Explanations
Click this button to open the Bi-D Adjustment dialog box where you can
adjust misalignment in vertical lines.
Click this button to open the Printer Settings utility dialog box where you
can change the printer settings.
LQ-690II/LQ-690IIN User's Guide
Printer Software 57