Monitoring Settings; Using The Epson Status Monitor 3 Utility - Epson DLQ-3500 Reference Manual

Settings
Halftone

Monitoring settings

Settings
EPSON Status
Monitor 3
Monitoring
Preferences

Using the EPSON Status Monitor 3 Utility

The EPSON Status Monitor 3 utility that comes with your printer
is available for Windows Me, 98, 95, 2000 or NT 4.0. It allows you
to monitor your printer's status, alerts you when printer errors
occur, and provides troubleshooting instructions when needed.
The EPSON Status Monitor 3 utility is available only when:
❏
The printer is connected directly to the host computer via the
parallel port [LPT1] or the USB port.
❏
Your system is configured to support bidirectional
communication.
The EPSON Status Monitor 3 utility is installed when you install
the printer driver as described in the Setup Guide.
Explanations
Click this button to set the brightness and contrast,
input the RGB gamma, or make other settings. The
Halftone Color Adjustment dialog box appears. For
details, click the Help button in this dialog box.
Explanations
You can access the EPSON Status Monitor 3 utility
when you click this button. To monitor the printer,
make sure the Monitor the printing status check box
is selected.
Click this button to open the Monitoring
Preferences dialog box where you can make
settings for the EPSON Status Monitor 3 utility. See
"Setting up EPSON Status Monitor 3" on page 2-14
for more information.
Printer Software
2-13