Table of Contents
Advertisement
1. At the back of your printer, tear off the last label form that has entered the printer. See the
illustration below.
2. Press the LF/FF button to eject the last label form forward.
Caution:
!
Do not leave labels loaded in the printer between print jobs; they tend to curl and may come off
their backing sheet and jam the printer when you resume printing.
Envelopes
You can print on a variety of envelopes by loading them the same way you load single sheets—from
the sheet guide.
Follow these steps to load envelopes:
Caution:
!
Use envelopes only under normal operating conditions.
Before printing, set the paper-thickness lever to the appropriate position for your envelopes
referring to the table in "Adjusting the Paper-thickness lever" on page 31.
1. Make sure that your software settings keep the printing entirely within the printable area. See
"Printable area" on page 121 for more information.
Caution:
!
Printing on the edge of an envelope can damage the print head.
LQ-690II/LQ-690IIN
User's Guide
Paper Handling
43
Advertisement
Table of Contents
