Switching Between Printing On Continuous Paper And Printing On Single Sheets; Switching To Printing On Single Sheets - Epson LQ-2080 User Manual

Switching Between Printing on Continuous Paper
and Printing on Single Sheets
You can easily switch back and forth between printing on
continuous paper with a push tractor and printing on single
sheets without having to remove or reload paper.

Switching to printing on single sheets

To switch from printing on continuous paper with the rear or
front push tractor to printing on single sheets, follow the steps
below.
Note:
If continuous paper with labels is loaded in the printer, remove it
before switching to single-sheet printing. See "Removing
continuous paper with labels" on page 2-34.
If a tractor is in the pull position, remove any continuous paper from
it before switching to single-sheet printing. See "Removing paper
from the pull tractor" on page 2-27.
1. If any printed pages of continuous paper remain in the
printer, press the Tear Off/Bin button to advance the printed
pages to the tear-off position, and then tear them off.
Caution:
c
Tear off your printed document before you press the
Load/Eject button in the next step. Reverse feeding
several pages at a time may cause a paper jam.
Never use the knob to eject paper while the printer is on;
this may damage the printer or cause it to lose the tear-
off position.
Printing on Continuous Paper
2
2-35