Operating Standards; Unit Specifications - Thermo Scientific TSX2305SA Installation And Operation Manual

Laboratory refrigerators
Table of Contents

Advertisement

6 Operating
Standards

6.1 Unit Specifications

Table 2. Unit Specifications
Rated
Model
Voltage
A
115V
D
208-230V
V
208-230V
Weight provided is for Laboratory Refrigerator with solid door (TSX2305S*). For a Pharmacy Refrigerator
(TSX2305P*), add 45 Kg (100 lbs). For a Laboratory Refrigerator with glass door (TSX2305G*), add 8 Kg
(18 lbs).
Thermo Scientific
The refrigerators described in this manual are classified for use as stationary
equipment in a Pollution Degree 2 and Overvoltage Category II environment.
These units are designed to operate under the following environmental
conditions:
Indoor use
Altitude up to 2000 m (6512 ft)
Maximum relative humidity 60% for temperatures from 15 to 32°C
(59 to 90°F).
Main supply voltage fluctuations not to exceed 10% of the nominal
voltage.
The refrigerator must not be connected to a GFCI (Ground Fault
Circuit Interrupter) protected outlet as it may be subject to nuisance
tripping.
The last character in the model number listed on the refrigerator identifies
the electrical specifications for your unit. The dataplate is located on the
upper left side of the unit.
Rated
Frequency /
Current
Phase
4.5 A
60Hz/1
2.3 A
50/60Hz/1
2.3 A
50/60Hz/1
Power
Weight
Module
Kg (lbs)
Plug
177 (391)
IEC 19
168 (370)
168 (370)

Operating Standards

Exterior Dimensions
(H x D x W)
199.7 x 95.3 x 71.1 cm
(78.6 x 37.5 x 28.0 in)
TSX Laboratory Refrigerators
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents