Table of Contents
Advertisement
S
UPERSERVER 5011H/5011E User's Manual
Power Loss Control
This option determines how the system will react when power is reapplied
after being lost unexpectedly. The settings are Always Off
loses power unexpectedly, the computer system will keep power off until
the power button is pressed), Always On (if the system loses power unex-
pectedly, the computer system will restore power) and Previous (if the
system loses power unexpectedly, the computer system restores the sys-
tem to its previous state before power was lost).
Keyboard Wake-Up Function
Use this option to specify which key is to be depressed to wake-up the
system from sleep mode. The settings are Disabled, CTRL F1, Space and
Any Key. Disabled: This setting prevents the computer system from using
the keyboard to power it on.
system to be powered on when the CTRL and F1 keys on the keyboard are
pressed.
Space: This setting allows the computer system to be powered
on when the Space bar on the keyboard is pressed. This is the default
setting. Any Key : This setting allows the computer system to be powered
on when any keys on the keyboard are pressed.
IDE Configuration
Onboard PCI IDE Controller
This option allows the user to enable or disable the integrated IDE Control-
ler. The settings include Disabled, Primary, Secondary and Both. Select
"Disabled" to disable the Integrated IDE Controller. Select "Primary" to en-
able the Primary IDE ontroller only. Select "Secondary" to enable the Sec-
ondary IDE Controller only. Select "Both" to enable both Primary and Sec-
ondary IDE Controllers.
Primary IDE Master
When entering "Setup", BIOS automatically detects the presence of
IDE devices. This displays the auto detection status of the IDE de-
vices. You can also manually configure the IDE drives by providing the
following information:
Ctrl F1: This setting allows the computer
7-8
(
if the system
Advertisement
Table of Contents
