Vivax ACP-12CC35AERIs R32 User Manual page 156

ENG
5. OPERATION
Remote signal receiving function
The wired remote controller can be a remote signal receiving device, you can use the wireless
remote controller to control the air-conditioner through the wired remote controller when the
system have been powered on.
To start/stop operation
To set the operation mode
Operation mode setting
Room temperature setting
Press the button" + "or " - " to set the room temperature. Indoor Setting
Temperature Range : 17~30℃(62~86℉)
Lower Rise
Fan speed setting
Fan speed
Press the Power button
Power
Operation lamp
Air conditioner ON :Lit brightly
Air conditioner OFF:Not lit
Press the Mode button to set the operation
mode.(Heat function is invalid for cool only type unit)
Press the Fan speed button to set the fan speed.
(This button is unavailable when in the mode of Auto or Dry)
VIVAX