Vivax ACP-12CC35AERIs R32 User Manual page 149

VIVAX
ENG
Setting both TIMER ON and TIMER OFF at the same time
Keep in mind that the time periods you set for both functions refer to hours
after the current time. For example, say that the current time is 1:00 PM,
and you want the unit to turn on automatically at 7:00 PM. You want it to
operate for 2 hours, then automatically turn off at 9:00 PM.
Do the following:
Exemple: Setting the unit to turn on after 6 hours, operate for 2 hours, then turn
off (see the figure below)
Your remote display
Timer is set to turn ON 6 hours from current time
Timer is set to turn OFF 8 hours from current time