Vivax ACP-12CC35AERIs R32 User Manual page 151

VIVAX
LED display
Press LED
button
Press this button to turn on and turn
off the display on the indoor unit.
ECO/GEAR function
ECO operation:
Under cooling mode, press this button, the remote controller will adjust the
temperature automatically to 24
when the set temperature is less than 24 C/75
o o
24 C/75 F, press the ECO button, the fan speed will change to Auto, the set
temperature will remain unchanged.
Note:
Pressing ECO button, or modifying the mode or adjusting the set temperature to
o
less than 24 C / 75
temperature should be 24
you feel uncomfortable, just prest he ECO button again to stop it.
GEAR operation:
Press the ECO/GEAR button to enter the GEAR operation as following:
- 75%(up to 75% electrical energy consumption)
- 50%(up to 50% electrical energy consumption)
- Previous setting mode.
Under GEAR operation, the display on the remote controller will alternage between
electrical energy consumption and set temperature.
Press this button to enter the energy efficient mode in
a sequence of following:
ECO GEAR(75%)

setting mode
Note: This function is only available under COOL mode.
o
C/75
o
F will stop ECO operation. Under ECO operation, the set
o o
C/75 F or above, it may result in insufficient cooling if
Keep pressing this button more
than 5 seconds, the indoor unit will
display the actual room
temperature. Press more than 5
seconds again will revert back to
display the setting temperature.
GEAR(50%)

ECO

o
F, fan speed of Auto to save energy (only
o
F). If the set temperature is above
Press this button
more than 5
seconds(some units)
Previous

ENG