Vivax ACP-12CC35AERIs R32 User Manual page 152

ENG
Silence function:
Keep pressing Fan button for more than 2 seconds to
activate/disable Silence function(some units).
Due to low frequency operation of compressor, it may result in
insufficient cooling and heating capacity. Press ON/OFF, Mode,
Sleep, Turbo or Clean button while operating will cancel silence
function.
FP function
Press this button 2 times during one second under HEAT Mode and setting
temperature of 16
LOCK function
SET function
 Press the SET button to enter the function setting, then press SET button or
TEMP or TEMP
▼
will flash on the display area, press the OK button to confirm.
 To cancel the selected function, just perform the same procedures as above.
 Press the SET button to scroll through operation functions as follows:
o o
C/60 F
The unit will operate at high fan speed (while compressor on)
with temperature automatically set to 8 C/46 F.
Note: This function is for heat pump air conditioner only.
Press this button 2 times during one second under HEAT
Mode and setting temperature of 16
function. Press On/Off, Sleep, Mode, Fan and Temp. button
while operating will cancel this function.
▲
button to select the desired function. The selected symbol
Press together Vane button and Turbo button
at the same time more than 5 seconds to
activate Lock function. All buttons will not
response except pressing these two buttons
for two seconds again to disable locking.
VIVAX
o o
C/60 F to activate FP